MDX V6-3.7L (2007)
Seals and Gaskets: Service and Repair
Center Case Oil Seal Replacement
Center Case Oil Seal Replacement
Special Tools Required
-
Companion flange holder 07XAB-001A101
-
Oil seal driver C 070AD-STK0130
-
Fork seal driver weight 07747-0010100
1. Remove the rear differential.
2. Remove the rear differential front mounting brackets (A) from the rear differential (B).
3. Remove the differential oil temperature sensor cover (A) differential fluid temperature (B) O-ring (C) and rear differential harness bracket (D).
4. Remove the left side case (A) the right side case (B) the four 10 x 12 mm dowel pins (C).
5. Remove the mounting bolts (A) in a crisscross pattern in several steps, then remove the bearing set plate (B) and the 83 mm shim (C).