MDX V6-3.7L (2007)
Transmission Speed Sensor: Service and Repair
Output Shaft (Countershaft) Speed Sensor Replacement
Output Shaft (Countershaft) Speed Sensor Replacement
1. Raise the vehicle up on a lift, or apply the parking brake, block both rear wheels, and raise the front of the vehicle. Make sure it is securely
supported.
2. Remove the transmission undercover (A) and splash shield (B).
3. Remove the damper from the front subframe.
4. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A) and sensor washer
(B).