MDX V6-3.7L (2007)
Power Window Switch: Service and Repair
Rear Power Window Switch Test/Replacement
Rear Power Window Switch Test/Replacement
1. Remove the rear door panel, and disconnect the 14P connector from the rear power window switch.
2. Remove the power window switch panel.
3. Remove the three mounting screws and the rear power window switch (A).
4. Swap the rear power window switch with another known-good power window switch and test. If the original power window switch is faulty;
replace it.
5. Install the switch in the reverse order of removal.
6. Reset the power window control unit.
