MDX V6-3.7L (2007)
Rear Door Window Regulator: Service and Repair
Rear Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel.
2. Detach the harness clip (A), and disconnect the power door lock actuator connector (B). Remove the plug caps (C).
3. Pass the cables (D) and the harnesses (E) through the slits (F) in the plastic cover (H), then remove it.
NOTE: Remove the glue from the door surface. If the plastic cover is damaged or torn, replace it.
4. Carefully move the glass (A) until you can see the bolts, then remove them. Release the glass from the holder (B), then remove it from the
regulator (C), and carefully lower the glass. Take care not to drop the glass inside the door.
