acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Other Service Bulletins for Speaker:|02-028|Page 9356 > < All Technical Service Bulletins:|06-011|Page 9353
Page 1
background image

Strut Mount: All Technical Service Bulletins
Body/Suspension - Noise From Dash Area

02-028

October 28, 2002

Applies To: 
2001 MDX - ALL
2002 MDX - From VIN 2HNYD1...2H500001 thru 2HNYD1...2H543293

Creaking or Ticking From the Dashboard or a Front Strut

SYMPTOM

A creaking or ticking comes from the dashboard or front fender area. The noise occurs when driving over bumps, and sometimes when braking or
turning.

PROBABLE CAUSE

Paint from the front damper mounting base is sticking to the body or burrs from a body spot weld are contacting the front damper mounting base.

CORRECTIVE ACTION

Remove the front damper/spring assembly, grind off the body spot weld burrs, and refinish the surface and/ or install shims to the damper mounting base.

PARTS INFORMATION

Self-Adhesive Shim:

P/N 75826-634-300, H/C 0701896
(Requires three shims per side)

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Failed Part:

P/N 60750-S9V-A00ZZ
H/C 7018351

Defect Code:

042

Contention Code:

B07

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

With the hood open and the vehicle parked, rock the vehicle from side to side, and listen for a creaking or ticking noise coming from the front damper
area. If you are unable to duplicate the noise, test-drive the vehicle over small bumps to help confirm the noise.

All Other Service Bulletins for Speaker:|02-028|Page 9356 > < All Technical Service Bulletins:|06-011|Page 9353