MDX V6-3471cc 3.5L (2002)
Fuel Door Release Cable: Service and Repair
Fuel Fill Door Opener Cable Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures in the SRS section before
performing repairs or service.
1. Remove these items:
-
Front door sill trim, left side
-
Rear door sill trim, left side
-
Rear side trim panel
2. Pull the carpet back as necessary.
3. Disconnect the fuel fill door opener cable (A) from the opener (B)
4. Release the opener cable from the clips (C, D), then remove the fuel fill door latch (E) from the body by turning it 90 °.
5. Remove the fuel fill door opener cable from the vehicle. Take care not to bend the cable.
6. Install the cable in the reverse order of removal.
