MDX V6-3471cc 3.5L (2002)
Carpet: Service and Repair
Carpet
Carpet Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to damage, wrinkle or twist the carpet.
-
Be careful not to damage the dashboard or other interior trim pieces.
1. Remove these items:
-
Front seats, both sides
-
Second row seats, both sides
-
Front door sill trim, both sides
-
Rear door sill trim, both sides
-
B-pillar lower trim panel, both sides
-
Kick panel, both sides
-
Console side trim, both sides
-
Console rear trim
-
Third row seat front mounting bolts, both sides
2. Release the retainers (A) and fasteners (B), lift both third row seat cushions (C) up, then pull the carpet (D) from under the center console (E) and
both rear side trim panels (F). Remove the carpet.
3. Install the carpet in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle, or twist the carpet.
-
Make sure the seat harness is routed correctly.
