MDX V6-3471cc 3.5L (2002)
Drink Holders: Customer Interest
Interior - Beverage Holder Won't Stay Open
02-023
September 9, 2002
Applies To:
2001-02 MDX - ALL
Beverage Holder Will Not Open
SYMPTOM
The beverage holder lid will not open.
PROBABLE CAUSE
The beverage holder spring is missing.
CORRECTIVE ACTION
Install a new beverage holder spring.
PARTS INFORMATION
Beverage holder spring: P/N 77231-S3V-A00
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Operation Number:
044105
Flat Rate Time:
0.2 hour
Failed Part:
P/N 77230-S3V-A01ZA
Defect Code:
078
Contention Code:
B99
Template ID:
02-023A
Skill Level:
Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1.
Apply a 3-inch piece of tape to the edge of the beverage holder lid. Leave about an inch unattached to use as a handle.
