MDX V6-3471cc 3.5L (2002)
Glove Compartment: Service and Repair
Glove Box Removal/Installation
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before performing repairs or service.
NOTE:
-
Take care not to scratch the dashboard and related parts.
-
If the glove box swings down without any support, the hinges can be overextended and damaged. To prevent damage to glove box hinge, use a
piece of foam or a bundle of shop towels to support it.
1. While holding the glove box (A), remove the glove box stop (B) on each side, then detach the lock (C) from the damper (D).
2. Remove the bolts, then remove the glove box (A).
