MDX V6-3471cc 3.5L (2002)
-
Use a 2-part urethane primer surfacer and a spray gun
-
Mix the primer surfacer with the additive and solvent, and in the correct ratio.
-
Follow the primer surfacer manufacturer's instructions.
5. Drying
After spraying primer surfacer, allow 7-10 minutes of drying time, then force dry it with infrared lamps or an industrial dryer.
6. Polishing
Check the primer surfacer has dried thoroughly, then sand the primer surfacer.
-
Use a double action sander and #400-#600 disc sandpaper.
7. Intermediate coating and top coating
-
Refer the painting Procedure.
