MDX V6-3471cc 3.5L (2002)
-1. Thoroughly sand the body filler surface.
Use the double action sander and #80-#120 disc paper.
-2. Sand the surface evenly, particularly the area that was filled.
Use the flexible block and #120-#180 sandpaper.
-3. Featheredge the paint coat.
Sand the body filler surface until the proper dimension are met.
Use the double action sander and #240-#320-#400 disc papers.
3. Air blowing / degreasing
Use the alcohol, wax and grease remover.
Also clean and degrease the surfaces where masking tape will be attached.