MDX V6-3471cc 3.5L (2002)
Memory Positioning Module: Testing and Inspection
Driving Position Memory System (DPMS)
Control Unit Input Test
1. Before testing the driving position memory control functions, troubleshoot the multiplex control system.
Door Unit:
2. Remove the driver's door panel.
3. Disconnect the connectors from the door multiplex control unit.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.