MDX V6-3471cc 3.5L (2002)
Roof Rack Frame: Service and Repair
Roof Rack Replacement
NOTE:
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
-
Take care not to scratch each cover, roof rack and body.
-
The front roof rack is wider than the rear roof rack. The rear cross rail has a caution label.
1. Remove the bracket covers (A) by sliding them in the direction shown while pushing the spring plate (B) through the hole on each bracket with a
flat-tip screwdriver. With a Torx T30 bit, remove the nuts from each bracket (C).
2. Remove the front roof rack (D) and rear roof rack (E). Do not remove the rubber pads from the brackets.
3. Install the front and rear roof racks in the reverse order of removal. Make sure the bracket covers are tightly snapped into place.
