MDX V6-3471cc 3.5L (2002)
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the terminals.
-
There should be continuity between the No.2 and No.3 terminals when the door lock knob switch is in the UNLOCK position.
4. If the continuity is not as specified, replace the door lock actuator.
Right Rear Door:
1. Remove the right rear door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the terminals.
-
There should be continuity between the No.1 and No.2 terminals when the door lock knob switch is in the UNLOCK position.
4. If the continuity is not as specified, replace the door lock actuator.
