MDX V6-3471cc 3.5L (2002)
Power Seat Switch: Testing and Inspection
Switch Test/Replacement
Driver's Switch:
1. Remove the power seat adjustment switch knob and recline cover from the driver's seat, then remove the power seat switch.
2. Disconnect the 6P connectors from the power seat adjustment switch (A).
3. Reinstall the adjustment switch knob to the switch.
4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity is not as specified, replace the switch.
Passenger's Switch:
1. Remove the power seat adjustment switch knob and recline cover from the passenger's seat, then remove the power seat switch.
