MDX V6-3471cc 3.5L (2002)
Cowl Moulding / Trim: Service and Repair
Cowl Cover Replacement
NOTE:
-
Take care not to scratch the cowl cover and body.
-
Use a clip remover to remove the hood rear seal clips.
1. Remove the windshield wiper arms.
2. Detach the clips (A), then remove the hood rear seal(B).
3. Pull the cowl cover (C) upward to detach the clips (D), then remove the cover.
4. Install the cowl cover in the reverse order of removal, and replace any damaged clips.