MDX V6-3471cc 3.5L (2002)
Rear Door Weatherstrip: Service and Repair
Rear Door Upper Seal
Rear Door Upper Seal Replacement
NOTE:
-
Take care not to scratch the door.
-
Use a clip remover to remove the clips.
1. Remove the door sash trim
2. Detach the door weatherstrip clip (A) and rear clip (B), then remove the door upper seal (C).
3. Install the upper seal in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Make sure the upper seal is installed in the holder (D) securely.