MDX V6-3471cc 3.5L (2002)
Brake Pad: Testing and Inspection
Front
Inspection
CAUTION: Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health. Avoid breathing
dust particles. Never use an air hose or brush to clean brake assemblies. Use an OHSA-approved vacuum cleaner.
1. Raise the front of the vehicle, and make sure it is securely supported. Remove the front wheels.
2. Check the thickness of the inner pad (A) and outer pad (B). Do not include the thickness of the backing plate.
Brake pad thickness:
Standard: 10.5 - 11.5 mm (0.41 - 0.45 inch)
Service Limit: 1.6 mm (0.06 inch)
3. If the brake pad thickness is less than the service limit, replace all the pads as a set.
