MDX V6-3471cc 3.5L (2002)
Parking Brake Shoe: Service and Repair
Parking Brake Lining Break-In
Lining Surface Break-in
NOTE: Perform brake linings surface break-in when replacing shoes with new linings and/or new rear brake disc/drum.
WARNING: Perform this operation in a safe area.
1. Park the vehicle on a firm, level surface.
2. Do the major parking brake adjustment.
3. Do the minor parking brake adjustment.
4. Press the parking brake pedal two to four clicks.
5. Drive the vehicle for 400 m (1/4 mile) at no more than 31 mph (50 km/h).
6. Stop the vehicle and release the parking brake for 5 - 10 minutes to allow the drums to cool.
7. Repeat steps 4 through 6 three more times.
8. Check the parking brake pedal adjustment.