MDX V6-3471cc 3.5L (2002)
Radiator: Service and Repair
Radiator and Fans Replacement
NOTE:
-
Use fender covers to avoid damaging painted surfaces.
-
To avoid damage, unplug the wiring connectors carefully while holding the connector portion. Mark all wiring and hoses to avoid Disconnection.
Also, be sure that they do not contact other wiring or hoses, or interfere with other parts.
1. Remove the radiator cover.
2. Remove the front bumper.
3. Make sure you have the anti-theft code for the radio and the navigation system, then write down the frequencies for the radio's preset buttons.
4. Disconnect the battery negative terminal first, then the positive terminal.
5. Remove the battery and battery tray.
6. Drain the engine coolant.
7. Remove the harness clips (A), and engine wire harness connectors (B) from the battery base.
8. Remove the ground cable (A), relay bracket (B) and harness clip (C), then remove the battery base (D).
