MDX V6-3471cc 3.5L (2002)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley Removal and Installation
Special Toots Required
-
Holder handle 07JAB-001020A
-
Holder attachment, 50 mm, offset 07MAB-PY3010A
-
Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket
Removal
1. Hold the pulley with the holder handle (A) and holder attachment (B).
2. Remove the bolt with a heavy duty 19 mm socket (C) and breaker bar.
Installation
1. Remove any oil from the pulleys (A), crankshaft (B), bolt (C), and washer (D). Clean and lubricate the points.