MDX V6-3471cc 3.5L (2002)
Rocker Arm Assembly: Testing and Inspection
VTEC Rocker Arm Test
Special Tools Required:
-
VTEC air adapter 07VAJ-P8A010A
-
VTEC air stopper 07VAJ-P8A020A
1. Remove the intake manifold cover (A) and ignition coil cover (B).
2. Remove the vacuum hoses (A) and breather pipe (B), then remove the intake air duct (C).
3. Remove the throttle cable (A) and cruise control cable (B) by loosening the locknuts (C), then slipping the cable ends out of the accelerator
linkage. Take care not to bend the cables when removing them. Always replace any kinked cable with a new one.
