MDX V6-3471cc 3.5L (2002)
18. Check the camshaft pulley marks.
-
If the camshaft pulley marks are at TDC, go to step 19.
-
If the camshaft pulley marks are not at TDC, remove the timing belt and repeat steps 2 through 15.
19. Install the dipstick and tube (A) with a new O-ring (B).
20. Install and adjust the P/S pump belt.
21. Install the alternator belt.
22. Install the side engine mount bracket, then tighten the mounting bolts in the numbered sequence.
Used Belt
Follow this procedure when installing a used timing belt.
1. Clean the timing belt pulleys, and the upper and lower covers.