MDX V6-3471cc 3.5L (2002)
5. Remove the bolts, then remove the condenser by lifting it up. Be careful not to damage the radiator and condenser fins when removing the
condenser.
6. Install the condenser in the reverse order of removal, and note these items:
-
If you're installing a new condenser, add refrigerant oil (DENSO ND-OIL 8).
-
Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the right
O-rings for HFC-134a (R-134a) to avoid leakage.
-
Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
-
Do not spill the refrigerant oil on the vehicle; it may damage the paint; if the refrigerant oil contacts the paint, wash it off immediately.
-
Be careful not to damage the radiator and condenser fins when installing the condenser.
-
Charge the system.
