MDX V6-3471cc 3.5L (2002)
8. With the passenger's multiplex control unit still disconnected, make these input tests at the connector and passenger's under-dash fuse/relay box
socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 9.
9. Reconnect the passenger's multiplex control unit to the passenger's under-dash fuse/relay box, and perform the following input tests at the
appropriate connectors on the back of the passenger's under-dash fuse/relay box.
-
If a test indicates a problem, find and correct the cause, then recheck the system.
-
If the input test proves OK, go to step 10.
Door Multiplex Control Unit:
10. Remove the driver's door panel and disconnect the 20P connector from the door multiplex control unit.
11. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
lithe terminals look OK, go to step 12.
