MDX V6-3471cc 3.5L (2002)
Engine Control Module: All Technical Service Bulletins
Engine Control - Replace PCM With Reman A/T Installation
06-005
September 19, 2008
Applies To:
2001-02 MDX - ALL
PCM Replacement with Remanufactured Transmission Installation (Replaces 06-005, dated March 17, 2006, to update the information marked by the
black bars and asterisks)
BACKGROUND
An updated powertrain control module (PCM) has been developed that can improve durability under certain, very specific driving conditions. For this
reason, the PCM must be replaced with an updated unit when installing a remanufactured transmission.
NOTE:
When you order a remanufactured A/T, you may also get an updated PCM. You must install this unit as part of the A/T replacement. This PCM may
be shipped separately, and may arrive on a different day than the remanufactured A/T.
CORRECTIVE ACTION
Whenever you install a replacement transmission verify the PCM part number and, if necessary, install an updated PCM.
NOTE:
If the vehicle has had a remanufactured transmission or PCM installed previously, it may already have the updated PCM. When servicing one of
these vehicles, confirm that PCM P/N 37820-PGK-305 or higher is installed.
^
If it is installed, return the new PCM.
^
If it is not installed, install the new PCM.
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Failed Part:
Use the remanufactured
transmission part number from
the repair order without the
RM designation (example:
P/N 06200-PY4-AW).
Defect Code:
58400
*Symptom Code:
03217*
Skill Level:
Repair Technician
NOTE:
For additional transmission replacement information, see Service Bulletin 90-009, Automatic Transmission In-Warranty Exchange Program.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE