MDX V6-3471cc 3.5L (2002)
4.
At the screen prompts, enter the VIN and the odometer reading, then verify the correct date/time.
5.
Select the Mode Menu. Then select Honda Systems.
6.
From the System Selection Menu screen, select PGM F1.
7.
From the Mode Menu screen, select Snapshot.
8.
From the Trigger Type menu, select the High Speed Set-up button.
9.
From the High Speed menu screen, select these parameters: Engine Speed, VSS, ECT Sensor, Map Sensor, TP Sensor, EGR-L-Command, and
EGR LIFT. Then select the green Check button.
10.
When the Trigger Type menu is displayed, select Manual, select Record Time for 30 seconds, and move the trigger point to the middle. Then
select the Blue Check button. Make sure the defaulted trigger point is in the middle.
11.
With the engine completely warmed up, have an assistant drive the vehicle while you operate the HDS. Drive the vehicle between 40 and 55 mph
on a smooth road. Apply light throttle with the transmission in 5th gear (between 1,500 and 2,000 rpm). If hesitation is felt, select the Snapshot
Manual Trigger button.
