MDX V6-3471cc 3.5L (2002)
9. Insert the injectors into the rail (D) first.
10. Coat new seal rings (E) with clean engine oil, and press them into the intake manifold.
11. To prevent damage to the O-rings, install the fuel rails first, then install them in the intake manifold.
12. Install the fuel rail mounting bolts.
13. Install the connectors on the injectors.
14. Install the intake manifold and the intake manifold cover.
15. Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs for about 2 seconds, the fuel pressure in the fuel line
rises. Repeat this 2 or 3 times, then check for fuel leakage.
