MDX V6-3471cc 3.5L (2002)
Cruise Control Module: Testing and Inspection
The Content of this article/image reflects the changes identified in TSB - SN050600-06
Control Unit Input Test
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures in the SRS section before
performing repairs or service.
1. Remove the driver's dashboard lower cover.
2. Disconnect the 14P connector from the control unit.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
Part 1
