acura Workshop Repair Guides

Acura (Honda) Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Starter Relay: Testing and Inspection

Normally-open type A:

Check for continuity between the terminals.

-

There should be continuity between the No.1 and No.2 terminals when power and ground are connected to the No.3 and No.4 terminals.

-

There should be no continuity between the No.1 and No.2 terminals when power is disconnected.

Starter cut relay

Relays and Modules > Relays and Modules - Starting and Charging > Starter Relay > Component Information > Testing and Inspection

< PREV PAGE NEXT PAGE >