MDX V6-3471cc 3.5L (2002)
1. Place the new front passenger's airbag (A) into the dashboard. Tighten the front passenger's airbag mounting nuts (B), and install the harness clip
(C).
2. Connect the front passenger's airbag 4P connector (A) to the SRS main harness 4P connector (B), then reinstall the glove box.
3. Reconnect the battery negative cable.
4. After installing the airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator light should come on for about 6
seconds and then go off.