MDX V6-3471cc 3.5L (2002)
Fog/Driving Lamp Switch: Testing and Inspection
Fog Light Switch Test
1. Remove the dashboard lower cover.
2. Disconnect the 8P connector (A) from the fog light switch (B).
3. Pull the fog light switch out from the dashboard lower cover.
4. Check for continuity between the terminals:
-
There should be continuity between the No.4 and No.5 terminals with the fog light switch OFF.
-
There should be continuity between the No.4, No.5 and No.6 terminals with the fog light switch ON.
5. If the continuity is not as specified, replace the switch.
6. If necessary, check the illumination bulbs (C).
