MDX V6-3471cc 3.5L (2002)
Transmission Position Switch/Sensor: Service and Repair
Transmission Range Switch Replacement
1. Raise the vehicle, and make sure it is securely supported.
2. Shift to the [N] position.
3. Remove the transmission range switch connector (A) from the connector bracket (B), then disconnect the connector.
4. Remove the harness clamp (C) from its bracket (D).
5. Remove the clamp from the clamp bracket on the transmission housing, and remove the harness holder (A) from the end cover (B).
6. Remove the transmission range switch cover (C), then remove the transmission range switch (D) from the end cover.
7. Set the new transmission range switch to the [N] position.
NOTE: The transmission range switch clicks in the [N] position.
