MDX V6-3471cc 3.5L (2002)
16. Remove the damper pinch bolts (A) and flange nuts (B) from the damper.
17. Pull the knuckle outward, and remove the driveshaft outboard joint (C) from the knuckle (D) by tapping the driveshaft end (E) with a plastic
hammer, then remove the knuckle.
18. Separate the hub (A) from the knuckle (B) using the special tool and a hydraulic press. Take care not to deform the splash guard. Hold onto the
hub to keep it from falling when pressed clear.
19. Remove the snap ring (A) and the splash guard (B) from the knuckle (C).
