MDX V6-3471cc 3.5L (2002)
9.
Install three self-adhesive shims to the damper mounting base as shown. Position the shims so the edge of the shim is slightly rolled over the edge
of the damper mounting base.
10.
Reinstall the damper assembly. Torque the three flange mounting nuts to 59 N.m (43 lb-ft).
11.
Reinstall the service caps to the upper portion of the damper cover.
12.
Reconnect the stabilizer link to the damper, and torque the mounting nut to 75 N.m (55 lb-ft).
13.
Reconnect the brake hose bracket to the damper, and torque the mounting bolt to 22 N.m (16 lb-ft).
14.
Reconnect the wheel sensor harness bracket to the damper, and torque the mounting bolt to 9.5 N.m (7 lb-ft).
15.
Reinstall the front wheels.
16.
Test-drive the vehicle over bumps to make sure the noise is gone.
Disclaimer
