MDX V6-3471cc 3.5L (2002)
3. Remove the bolt (A) and collar (B) from the rear channel (C). Pull the upper seal (D) away as needed, and remove the screw (E). Pull the glass run
channel (F) away as needed from the rear channel.
4. Move rear channel away from the quarter glass (G), then remove it out through the window slot. Take care not to damage the door molding (H).
5. Carefully remove the glass (A) out through the window slot. Take care not to drop the glass inside the door.
6. Remove the door glass outer weatherstrip.
