NSX-T V6-3.0L DOHC (VTEC) (1998)
/Page-1054005.png)
Number 2 Piston At Top Dead Center
8. Rotate the crankshaft 120° clockwise (camshaft pulley turns 60°). Check that the front intake camshaft pulley is positioned as shown.
Repeat step 3 to step 6.
Number 2 piston at TDC:
Number 5 Piston At Top Dead Center
9. Rotate the crankshaft 120° clockwise (camshaft pulley turns 60°). Check that the front intake camshaft pulley is positioned as shown.
Repeat step 3 to step 6.
Number 5 piston at TDC:
Number 3 Piston At Top Dead Center
10. Rotate the crankshaft 120° clockwise (camshaft pulley turns 60°). Check that the front intake camshaft pulley is positioned as shown.
Repeat step 3 to step 6.
Number 3 piston at TDC:
