NSX-T V6-3.0L DOHC (VTEC) (1998)
11
Select the Immobilizer menu (# 5).
12.
Select the Rewrite option (# 3).
13.
Select the ECM (# 2).
14.
Enter the PGM Tester password.
15.
Press Enter to rewrite the immobilizer code in the ECM.
16.
Disconnect the PGM Tester.
17.
Turn the ignition switch ON. The immobilizer indicator should come on for two seconds, then go out.
18.
Center-punch a completion mark above the second character (H) of the engine compartment VIN.
Disclaimer