NSX-T V6-3.2L DOHC (VTEC) (1997)
10. Glue the new EPT sealer to top edge of the front pillar retainer as shown.
11. Install the front pillar retainer.
NOTE:
-
Be careful not to touch the front pillar retainer where sealant will be applied.
-
First tighten the screw at top of the front pillar retainer.
12. Apply new sealant to the body and retainers on each side as shown.
13. Peel the separator off from the butyl tapes on the new front pillar seal.