NSX-T V6-3.2L DOHC (VTEC) (1997)
Unibody: Service and Repair
Front Assembly
Description
The front assembly is critical for the rigidity of the front compartment and front wheel alignment, as it is integrated with the front wheelhouse. During
installation, the dimension shown in the body dimensional drawings. Welding must be performed by using the aluminum alloy MIG welder. Perform the
trial welding first following the welder manufacturer's instructions, then weld properly.
NOTE: Do not section frame rails except at manufacturers seams.
Replacement
1. Remove the related parts.
-
Front suspension related parts
-
Brake hoses and pipes
-
Front compartment electrical components
-
Fittings in passenger compartment, etc.
-
Windshield