NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-4361004.png)
-
Remove the front inner lower pillar on each side.
6. Remove the dashboard upper side cross member on each side.
7. Remove the wheelhouse and side frame on each side.
8. Remove the dashboard lower.
9. Remove the front assembly.
-
Grind the fillet welds of the side frame-and-side sill joint using a rotary cutter as shown.
-
Peel off the welding flange using the chisel.
-
Remove the burrs from the drilled sections with a disc grinder or disc sander.
