NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-4375001.png)
Hard Top Weatherstrip: Service and Repair
Rear Pillar Seal/Retainer
Rear Pillar Seal/Retainer
Replacement
NOTE:
-
When the rear pillar seal has been removed, and/or it is damaged, replace it with new one.
-
Have an assistant help replace the rear pillar seal.
1. Remove the roof.
2. Remove the rear roof rail trim.
3. Detach the clips from the bottom of both rear pillar.
4. Remove the screws, and detach the clips from each side, then remove the rear pillar seal.
