NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-3055001.png)
Brake Fluid Accumulator: Vehicle Damage Warnings
CAUTION:
-
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
-
To prevent spills, cover the hose joints with rags or shop towels.
-
Clean all parts in brake fluid and air dry; blow out all passages with compressed air.
-
Before reassembling, check that all parts are free of dust and other foreign particles.
-
Replace parts with new ones whenever specified to do so.
-
Before disassembling the accumulator unit, bleed the high-pressure brake fluid out from the system using the Bleeder T-wrench.
-
Make sure no dirt or other foreign matter is allowed to contaminate the brake fluid.
-
Do not reuse the drained fluid. Always use DOT 3 Brake Fluid. Using a non-DOT 3 brake fluid can cause corrosion and decrease the life of the
system.
