NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-3132001.png)
Brake Pad: Service and Repair
Front
WARNING:
-
Never use an air hose or dry brush to clean brake assemblies.
-
Use an Occupational Safety and Health Administration (OSHA)-approved vacuum cleaner to avoid breathing brake dust.
REPLACEMENT
1. Loosen the front wheel nuts slightly, then raise each side of the car and support it on safety stands. Remove the front wheels.
2. Remove the two brake hose mounting bolts. Remove the two caliper mounting bolts, and move the caliper out of the way. Support the caliper with
