acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

TCS Control Unit <--> [Traction Control Module]|Locations|Page 5794 > < TCS Control Unit <--> [Traction Control Module]|Locations
Page 1
background image

TCS Control Unit: Description and Operation

ACCELERATION CONTROL

When the drive wheel speed exceeds the vehicle speed by a given amount, the Traction Control System (TCS) control unit judges that the drive
wheels are slipping, and it outputs the traction control signal to reduce engine power.

DECELERATION CONTROL

When the drive wheel speed drops below the vehicle speed by a given amount, the TCS control unit judges that the drive wheels are slipping, and it
outputs the traction control signal to control engine braking properly.

HANDLING CONTROL

Based on signals about driving wheel and driven wheel rotational speeds, the control unit calculates the car's "yaw" rate (the turn rate of the car's
body). Based on signals from the steering angle sensor, the control unit also calculates the yaw rate expected by the driver. If the difference between
actual and expected yaw rates is substantial -- that is, if the direction of the car's body will exceed the driver's expected line the control unit signals the
throttle actuator, which closes the throttle valve, thus reducing engine power and maintaining the expected line.

ROUGH ROAD CONTROL

Based on signals from the wheel sensors, the control unit detects a rough road based on frequency of wheel rotational vibration. The control unit then
signals the throttle actuator to relax engine power, thus improving acceleration efficiency.

GRIP CONTROL

Based on signals about wheel speed and lateral acceleration, the control unit determines the efficiency of the grip of the tires on the road and signals
the throttle actuator to relax engine power if necessary, thus improving grip.

FAIL-SAFE FUNCTION

If the control unit detects an abnormality, it shuts the traction control system off and causes the TCS indicator light to come on. However if the
abnormality is detected while the TCS is activated, the control unit first establishes the appropriate wheel spin velocity, then shuts the system down,
thus preventing excessive wheel spin.

SELF-DIAGNOSIS FUNCTION

TCS Control Unit <--> [Traction Control Module]|Locations|Page 5794 > < TCS Control Unit <--> [Traction Control Module]|Locations