NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-1011005.png)
-
Do not install the parts if five minutes or more have elapsed since applying liquid gasket. Instead reapply liquid gasket after removing old
residue.
-
After assembly, wait at least 20 minutes before filling the engine with oil.
9. Install the oil pass pipe and joint.
10. Install the baffle plate.
11. Install the oil screen.
12. Install the oil pan.
CAUTION: Whenever any crankshaft or connecting rod bearing is replaced, after reassembly, run the engine at idling speed until it reaches
normal operating temperature, then continue to run for approximately 15 minutes.
