NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-1142002.png)
(3) Front exhaust camshaft pulley
(4) Front intake camshaft pulley
(5) Water pump pulley
(6) Rear intake camshaft pulley
(7) Rear exhaust camshaft pulley
NOTE: Make sure the timing belt drive pulley and camshaft pulleys are at TDC.
5. Tension the timing belt between the pulleys in the sequence A to E (see image).
6. Adjust the timing belt.
7. Install the lower cover and middle covers.
8. Install the crankshaft pulley, then tighten the pulley bolt.
