NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-1193001.png)
Valve Clearance: Adjustments
NOTE:
-
Valves should be adjusted cold, when the cylinder head temperature is less than 100°F (38°C).
-
Adjustment is the same for both intake and exhaust valves.
-
Adjust valve clearance at Top Dead Center (TDC) of each cylinder.
-
Do not rotate the engine counterclockwise. The timing belt could jump a tooth on the camshaft pulleys.
1. Remove the cylinder head covers.
