NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-3728001.png)
Heater Core Temperature Sensor / Switch: Testing and Inspection
Component Test
Heater Core Temperature Sensor-Test
Heater Core Temperature Sensor-Test
Compare the resistance reading between the terminals of the heater core temperature sensor with specifications shown in the graph: It should be within
specification.
NOTE: Dip the sensor in ice water, and measure the resistance. Then pour hot water on the sensor, and check for change in resistance.
CAUTION: The sensor uses a thermistor which can be damaged if high current is applied to it during testing. Therefore, use a circuit tester that puts
out a measuring current of 1 mA or less.
