NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-5145001.png)
Trunk Lamp: Service and Repair
NOTE: The bulb or lens alone can be replaced without having to remove the trunk side panel.
1. Remove the trunk side panel.
2. Disconnect the 3P connector from the light housing.
Trunk Light Test/Replacement
3. Remove the two screws and the retainer plate, then remove the light from the trunk side panel.
Trunk Light Test/Replacement
4. Make sure that the bulb is OK, then check for continuity between the A and B terminals. There should be continuity.
